Yongte Recycled PE Board Extrusion Line is specially designed to process waste polyethylene and polypropylene materials such as packaging films, hollow buckets, containers, pipes and injection molded parts. After crushing, cleaning and drying, the materials are continuously extruded, calendered and cooled into flat sheets, which are then cut to size according to customer requirements. It can be configured with single-layer, co-extrusion or multi-layer extrusion solutions according to different application scenarios.
Recycled PE Board Extrusion Line for Processing Waste Polyethylene and Polypropylene Materials
Description
Yongte Recycled PE Board Extrusion Line is specially designed to process waste polyethylene and polypropylene materials such as packaging films, hollow buckets, containers, pipes and injection molded parts. After crushing, cleaning and drying, the materials are continuously extruded, calendered and cooled into flat sheets, which are then cut to size according to customer requirements. It can be configured with single-layer, co-extrusion or multi-layer extrusion solutions according to different application scenarios.
Technical Parameter
Item
Parameters
Production line
Recycled Plastic board co-extrusion line
Main Extruder model
SJ120/33
Extruder Main motor
132-160 KW
Co-extruder model
SJ75/33
Electric condition
380v/50HP/3phases, or customized
Applicable materials
PP、PE recycled granules/flakes
Product width
1220mm or customized
Product thickness
5-30mm or customized
Water supply
<20 degree, 8m3/hour
Air supply
0.8Mpa, 0.4m3/minute
Extrusion capacity
600-800kg/h
Total installation power
350 KW
Power consumption
150 KWH
Inverter brand
ABB brand
PLC control
Siemens brand
Warranty term
36 months
Production time
90 days
Quality certificate
CE certified
Line length
30 meters
Detailed Equipment List
No.
Equipment list
Qty./set
Main Parameter
1
Auto screw feeder
2 sets
304 Stainless steel made
2
Main extruder
1 set
SJ120/33 Single Screw Extruder,
with hopper dryer,auto material feeder,
Main motor: 132-160 kw
Extrusion capacity: 600-800 kg/h
3
Co-extruder:
1 set
SJ75/33 Single screw extruder,
with hopper dryer,auto material feeder
Main motor: 45-55 kw
Extrusion capacity: 150-200 kg/h
4
T extrusion Mold
1 set
Model width: 1350mm
Product width: 1220mm
Product thickness: 5-30mm
5
Melt pump system
1 set
6
Hydraulic screen filter system
1 set
7
Three-roller calendaring machine
1 set
Roller size: 450*1400mm
Drive motor: 0.85KW *3 sets servo motor
hardness HRC≥62 degree
degree of finish Ra≤0.025Um
8
Cooling bracket
1 set
Length: 10 meters
Material: 304 SS roller
9
Hauling off device
1 set
Rubber roller: φ250*1400mm
Driver power: 2.9 kw servo motor
10
Cutting device
1 set
Cutting power: 3KW
11
Product stacker
1 set
Length: 3m
12
Electricity control system
1 set
Control method: The system provides the following critical alarm-and-stop functions: (1) excessive main motor current; (2) after the main motor has started rotating, a maximum torque of 105% may be maintained continuously for 3 minutes; upon reaching this limit, an alarm is displayed and the system stops.
Each piece of equipment listed above is engineered to integrate seamlessly into the continuous production workflow of the recycled PE board line.
The auto screw feeders ensure consistent, metered delivery of dried recycled flakes or granules to both the main and co-extruder, preventing material starvation or overload during long production runs.
The SJ120/33 main extruder and SJ75/33 co-extruder utilize high-efficiency single screw designs to melt and homogenize the recycled PP/PE materials, with precise temperature control zones to avoid material degradation.
The T extrusion mold is calibrated to deliver uniform material distribution across the full 1220mm width, while the melt pump stabilizes extrusion pressure for consistent sheet thickness.
The hydraulic screen filter system continuously removes contaminants from the melt without interrupting production, improving finished board quality.
The three-roller calendaring machine shapes the extruded melt into flat sheets with smooth surface finish, and the cooling bracket accelerates uniform cooling to prevent warping.
The haul-off device pulls the sheet at a synchronized speed to maintain dimensional stability,
the cutting device trims the sheet to customer-specified lengths, and the product stacker automatically collects finished boards for streamlined downstream handling.
The Siemens PLC-based electricity control system coordinates all line components, enabling centralized speed, temperature and pressure regulation for reliable
Contact Yongte for a quote on Wood Plastic WPC machines, WPC decking complete production line, Tunrkey WPC door production project, WPC profile making machine, PPR/PE PVC plastic pipe machines, plastic profile machines,plastic sheet machines or recycling systems. Get advanced, durable equipment with 3 years warranty, CE certification.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy